Home  >  Service  >  FAQ

How to install the smart switch wiring diagram

source:FAQ Popular:Silicone Neon release time:2021-03-26 Article author:小编

The wiring of the smart switch is actually divided into two aspects, which are divided into wire wiring and signal wire wiring, which are explained separately below:
1. Wire wiring

The wiring of the smart switch is actually the same as that of the ordinary switch, and at the same time it is a bit simpler than the ordinary switch. The specific wiring method is basically arranged by the electrician, and the specific details will not be explained in detail. Mainly there are some differences. The wiring of the traditional switch mainly takes into account that some lights need dual control, or even three control, so the wiring is more complicated. With the current smart switch wiring, there is no need to consider the issue of multiple controls at all, just connect the corresponding light wires to the corresponding switch bottom box. That is to say, complete the wiring according to the single control. Then, how to achieve the requirement of multi-control? This is the second part of the signal line to solve

2: Signal wiring

The current smart switch, intelligence is mainly reflected in the mutual control between the switch, the switch and the switch form a network, through the transmission of signal commands within the network, to achieve the purpose of intelligent control. For example, in the multi-control just now, the command is transmitted to the switch that is actually wired through the signal line, and the switch is commanded to turn the light on or off.

In order to form a network between the switch and the switch, it is necessary to connect all the switches with a signal line. The signal wire is a weak wire, which also requires operations such as slotting and routing, and the principle of weak current wiring must be followed. Taking the smart switch wiring of the most popular 485 communication protocol, the wiring is actually very simple, as long as the various switch bottom boxes are connected in series with the signal line, the connection method is very flexible.

Read recommendations:

360-digital-tube programmable 360 degree led tube light for stage

ADS-IC6018S waterproof led amusement pixel light

ADS-F720-150W 16 keys remote control rgb dmx led flood lights

How to install the smart switch wiring diagram

On LED intelligent lighting and related applications?

Previous:How to connect the smart lighting controller? Back to list Next:there is none left

Column related

Article recommendation

Neon resin word raw materials.Waterproof Rgb Led Strip Wholesale


Aidisen successful take part in Guangzhou International Prolight + Sound Exhibition


Neon lights of the night.Mini Led Neon Flex Housing


How to effectively increase the utilization rate of solar street lights?


What is the difference between led strip lighting and conventional lighting?40mm led pixel


The impact of the new crown epidemic on the solar street light market


E10 And E14 LED lamp What’s The Difference?


Five tips for interior design led strips.addressable pixel led


What should be paid attention to in the packaging of led light strip manufacturers?Led Flat Flex


What are The Best LED Christmas Lights?


Aidisen 12V ws2811 20pixel 60 led digital silicone Pixel flex neon led with size 20mmX20mm


What is the reason why the LED strip does not light up?address rgb led tube factory


How to use led strips correctly.Neon Flex


LED linear lights have great advantages in outdoor landscape lighting


LED neon light detailed dry goods knowledge sharing.Mini controller


About the life of the point light source of the LED linear lamp


Integrated LED Outdoor Flood Light


How many watts is one meter of led lights?Waterproof power supply Wholesale


Market Prospect Analysis of LED Resin Mini Characters


What are the inspection standards for LED street lights?


Key Products

Related products